FAQ

   


FAQs by Category 

Installation Guide


  
FAQ No.:00313 
Category:Curtain MonGuard 
 
Question:How to migrate Curtain MonGuard Admin to a new machine?
 
Answer:There are 2 scenarios:
(1) Migrate Curtain MonGuard Admin to a new machine : Using the same hostname and IP address
(2) Migrate Curtain MonGuard Admin to a new machine : Using different hostname and IP address

Preparation:
1. Backup policies from existing Curtain MonGuard Admin, please copy folder and files stated below.
  • C:\Program Files\Coworkshop\Curtain 3\bin\Config
  • C:\Program Files\Coworkshop\Curtain 3\bin\ServerStore.dat
  • C:\Program Files\Coworkshop\Curtain 3\bin\ServerStore.enx

2. Backup Audit Trail files from existing Curtain MonGuard Admin, please copy files stated below.
  • C:\Program Files\Coworkshop\Curtain 3\bin\Curtain.mdb (it exists in old versions)
  • Backup the whole "Curtain" folder
    • for Windows 2000 / XP / 2003, this folder should be under C:\Documents and Settings\All Users\Application Data
    • for Windows 2008 / 2012 / 2016 / 2019 / Vista / Win 7 / Win 8 / Win 10/ Win 11, this folder should be under C:\ProgramData

For scenario 1 - Migrate Curtain MonGuard Admin to a new machine : Using the same hostname and IP address:
Here are migration steps:
1. Shutdown existing Curtain Policy server (i.e. the machine which hosts Curtain MonGuard Admin) or simply disconnect it from the network.

2. Install a new machine with the same hostname and IP address of the existing Curtain Policy server.

3. Install Curtain MonGuard Admin on the new machine (For detail information, please refer to related documents).

4. Activate the license of Curtain e-locker (For detail information, please refer to related documents).

5. Copy Policies and Audit Trail (the folder and files backup in Preparation) to the new machine.
- In Computer Management, Stop "Curtain e-locker Server" service.
- Restore the folder and files to the new machine.
- In Computer Management, Start "Curtain MonGuard Server" service.


6. Since the hostname and IP address of the new machine are the same as that of old Curtain Policy server, all Curtain MonGuard Clients will automatically connect to the new Curtain MonGuard Admin.

7. Done


For scenario 2 - Migrate Curtain MonGuard Admin to a new machine : Using different hostname and IP address:
Here are migration steps:
1. Install a new machine with different hostname and IP address.

2. Install Curtain MonGuard Admin on the new machine (For detail information, please refer to related documents).

3. Activate the license of Curtain MonGuard on the new machine (For detail information, please refer to related documents).

4. Copy Policies and Audit Trail (the folder and files backup in Preparation) to the new machine.
- In Computer Management, Stop "Curtain e-locker Server" service.
- Restore the folder and files to the new machine.
- In Computer Management, Start "Curtain e-locker Server" service.

5. In the existing Curtain MonGuard Admin, select "File > Settings" in the menu. Then, "Settings" window will be shown.

6. Enter hostname or IP address of the new machine in "New Central Administrator", and Click OK.



When Curtain Clients connect to the existing Curtain MonGuard Admin, they will be notified that there is a new Curtain MonGuard Admin. Status of these Curtain MonGuard Clients will change to "Detached". When status of all Curtain MonGuard Clients change to "Detached", administrators can switch off (or uninstall) the old Curtain MonGuard Admin. All Curtain MonGuard Clients are managed by the new Curtain MonGuard Admin.



7. Done


P.S. You should use the same Authorization String in the new Curtain MonGuard Admin.