FAQ

繁 | 簡 | GET A TRIAL | PURCHASE
   


FAQ Home 

Curtain e-locker
Installation Guide
User Guide 

Curtain LogTrace 

Curtain MonGuard

Website Product Page
Curtain e-locker
Curtain LogTrace
Curtain MonGuard 
 
FAQ No.:00257 
Category:Curtain Client 
 
Question:

How to use Curtain client to setup protection ?

 
 
Answer:For some company , the server resources are stored at NAS or Linux server . Curtain e-locker able to set protection by client side .Please follow below steps to define Protected server resources.

Steps to define Protected server resources:
1. In Curtain Admin, select "File > Settings".
e-locker data loss prevention(DLP) - Settings

2. In Server Information tab, click Add button to add server information first. 

Server Address: Hostname or IP address of the server.

Port: Default value is Port 8443 (for communication between Curtain Admin and Curtain Server Plug-in).
e-locker data loss prevention(DLP) - add server information


3. Add Protected server resources.

For scenario 1 - Protect share folder of NAS
- In Network Drives Protection tab, check "Enable Protection".
- Click "Add" button, a dialog box will be shown.
e-locker data loss prevention(DLP) - Protect share folder of NAS

UNC Path: \\Server\Share Name
  • Server - Select the server (hostname or IP address)
  • Share Name - Enter name of the Share (not the folder name, unless you gave the Share the same name as the folder)

Enable map drive: Check this option and select a drive letter, if you want all Curtain Clients map themselves to this drive at startup. Otherwise, users need to do drive mapping manually or use their own logon script.

Protected by Client: Enable this option ONLY when you need to protect share folders without Curtain Server Plug-in installed on the server (e.g. NAS).

DFS Path: Check this option, if share folder listed above is managed by DFS (Distributed File System).
  • Server - Enter server name (users should see the server name as apparent host in My Network Places)
  • Path - Enter path name (the path that users see to the share folder in My Network Places)

For scenario 2 - Protect Web Application(start with http://)
- In Protected Web Application, check "Enable Protection".
- Click "Add" button, a dialog box will be shown.
e-locker data loss prevention(DLP) - Protect Web Application

Protected Web: http://Hostname: Port Number
  • Hostname - Select the web server (hostname or IP address)
  • Port Number - Enter port number (port 80 is used by most web applications)

Protected by SDK: Select this option, if the web application has been customized for Curtain e-locker by using our SDK (software development kit).
Protected by Server Plug-in: Select this option, if the web application has NOT been customized for Curtain e-locker.

Protected Web Page Location: http://Hostname/Path
  • Path - Enter the path you want to protect (Protected all if none)

For scenario 3- Protect Web Application(start with https://)
- In Port Protection, check "Enable Protection".
- Click "Add" button, a dialog box will be shown.
e-locker data loss prevention(DLP) - Protect Web Application
  • Address - Select the server (hostname or IP address)
  • Port Number - Enter port number (default port for HTTPS is 443)
  • Protocol - Select protocol (default protocol for HTTPS is TCP)
  • Protection Type - Select Only protected by Curtain Client

4. Click OK to confirm.

To enable it, please refer to FAQ 00097 - How to launch Curtain Client